Cisco MDS 9000 series Command Reference Manual page 594

interface port-channel
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command History Release
1.0(2)
1.3(1)
Usage Guidelines
Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number
allocation.
Examples The following example enters configuration mode and configures a PortChannel interface.
switch# config terminal
switch(config)# interface port-channel 32
switch(config-if)#
The following example assigns the FICON port number to the selected PortChannel port.
switch# config terminal
switch(config)# interface Port-channel 1
switch(config-if)# ficon portnumber 234
Related Commands Command
show interface
Cisco MDS 9000 Family Command Reference
11-36
Modification
This command was introduced.
Added channel mode active subcommand.
Description
Displays interface configuration for specified interface.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x