Cisco MDS 9000 series Command Reference Manual page 477

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following examples shows how to configure the Cisco Fabric Analyzer.
switch# config terminal
switch(config)# fcanalyzer local
Capturing on eth2
switch(config)# fcanalyzer local brief
Capturing on eth2
switch(config)# fcanalyzer local display-filter SampleF
Capturing on eth2
switch(config)# fcanalyzer local limit-frame-size 64
Capturing on eth2
switch(config)# fcanalyzer local limit-captured-frames 10
Capturing on eth2
switch(config)# fcanalyzer local write SampleFile
Capturing on eth2
switch(config)# fcanalyzer remote 10.21.0.3
Capturing on eth2
switch(config)# fcanalyzer remote 10.21.0.3 active
Capturing on eth2
Related Commands Command
clear fcanalyzer
show fcanalyzer
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Description
Clears the entire list of configured hosts.
Displays the list of hosts configured for a remote capture.
Cisco MDS 9000 Family Command Reference
fcanalyzer
8-13