Scheduler Aaa-Authentication - Cisco MDS 9000 series Command Reference Manual

scheduler aaa-authentication

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
scheduler aaa-authentication
To use the command scheduler feature, a remote user must use the scheduler aaa-authentication
command to specify an AAA authentication password.
Syntax Description password
0
7
password
username username
Defaults
None.
Command Modes Configuration mode.
Command History Release
3.0(3)
Usage Guidelines
This command is for remote users who need to use the scheduler feature.
Examples
The following example specifies a remote user's password.
switch# config t
switch(config)# scheduler aaa-authentication password newpwd
The following example specifies a remote user's password in clear text.
switch# config t
switch(config)# scheduler aaa-authentication password 0 newpwd
The following example specifies a remote user's encrypted password.
switch# config t
switch(config)# scheduler aaa-authentication password 7 newpwd2
The following example specifies a remote user's name and AAA authentication password.
switch# config ts
switch(config)# scheduler aaa-authentication username admin1 password newpwd3
Cisco MDS 9000 Family Command Reference
21-6
scheduler aaa-authentication [username username] password [0
Modification
This command was introduced.
Specifies the password of the logged-in remote user for AAA
authentication.
Indicates the password is in clear text.
Indicates the password is encrypted.
Specifies the remote user's password.
Specifies the remote user's name.
Chapter 21 S Commands
|
7] password
OL-8413-07, Cisco MDS SAN-OS Release 3.x