Cisco MDS 9000 series Command Reference Manual page 641

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following command configures the dynamic initiator mode as iSLB.
switch(config)# iscsi dynamic initiator islb
The following command configures the dynamic initiator mode as deny.
switch(config)# iscsi dynamic initiator deny
The following command reverts to the default dynamic initiator mode of iSCSI.
switch(config)# no iscsi dynamic initiator deny
Related Commands Command
iscsi save-initiator
show iscsi global
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Description
Permanently saves the automatically-assigned nWWN or pWWN mapping.
Displays global iSCSI configured information.
Cisco MDS 9000 Family Command Reference
iscsi dynamic initiator
11-83