Qos Class-Map - Cisco MDS 9000 series Command Reference Manual

qos class-map

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
qos class-map
To create and define a traffic class with match criteria that will be used to identify traffic, use the qos
class-map command in configuration mode. To remove a previously-configured class, use the no form
of the command.
Syntax Description class-name
match-all
match-any
Defaults match-all
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
You can access this command only if you enable the QoS data traffic feature using the qos enable
command.
Examples The following example shows how to create a QoS class map and enter class map configuration mode.
switch# config terminal
switch(config)# qos class-map MyClass1
switch(config-cmap)#
Related Commands Command
show qos
Cisco MDS 9000 Family Command Reference
19-2
qos class-map class [match-all | match-any]
no qos class-map class
Specifies a class map name. Maximum length is 63 alpha-numeric
characters.
Specifies a logical AND operator for all matching statements in this class.
(default).
Specifies a logical OR operator for all matching statements in this class.
Modification
This command was introduced.
Description
Displays configured QoS information.
Chapter 19 Q Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x