Show Fcdroplatency - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show fcdroplatency

To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
Syntax Description
network
switch
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the configured Fibre Channel latency parameters.
switch# show fcdroplatency
switch latency value:4000 milliseconds
network latency value:5000 milliseconds
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show fcdroplatency [network | switch]
Network latency in milliseconds.
Switch latency in milliseconds.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
show fcdroplatency
22-75