Debug Mip - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug mip

To enable debugging for multiple IP (MIP) kernel drivers, use the debug mip command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description errors
events
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug mip errors command is issued:
switch# debug mip errors
Related Commands Command
no debug all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug mip {errors | events}
no debug mip {errors | events}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for MIP error conditions.
Enables debugging for MIP events.
Cisco MDS 9000 Family Command Reference
debug mip
6-81