Debug Dstats - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug dstats

To enable delta statistics debugging, use the debug dstats command in EXEC mode. To disable a debug
command use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
error
flow
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug dstats flow command is issued:
switch# debug dstats flow
Related Commands Command
no debug all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug dstats {error | flow}
no debug dstats {error | flow}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for delta statistics error conditions.
Enables debugging for the delta statistics flow.
Cisco MDS 9000 Family Command Reference
debug dstats
6-23