Cisco MDS 9000 series Command Reference Manual page 739

Chapter 15 M Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following example shows how to configures an IVR zone member based on the device alias VSAN,
and the AFID.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# ivr zone name IvrLunZone
switch(config-ivr-zone)# member device-alias Switch4 vsan 1 autonomous-fabric-id 14
The following example shows how to configures an IVR zone member based on the pWWN, VSAN, and
the AFID.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# ivr zone name IvrLunZone
switch(config-ivr-zone)# member pwwn 29:00:00:05:30:00:06:ea vsan 1 autonomous-fabric-id
14
Related Commands Command
show ivr zone
OL-8413-07, Cisco MDS SAN-OS Release 3.x
End with CNTL/Z.
End with CNTL/Z.
Description
Displays the IVR zone information.
member (ivr zone configuration)
Cisco MDS 9000 Family Command Reference
15-9