Role Name - Cisco MDS 9000 series Command Reference Manual

Chapter 20 R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

role name

To configure and assign users to a new role or to modify the profile for an existing role, use the role
name command in configuration mode. Use the no form of this command to delete a configured role.
Syntax Description
name
description
user description
exit
no
rule
number
permit
deny
clear
config
debug
show
feature
exec
name
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
OL-8413-07, Cisco MDS SAN-OS Release 3.x
role name name [description user description] [rule number permit clear feature name |permit
config feature name | permit debug feature name | permit show feature name] [rule number
deny clear feature name | deny config feature name | deny debug feature name | deny exec
feature name | deny show feature name]
no role name name [description user description] [rule number permit clear feature name |
permit config feature name | permit debug feature name | permit show feature name] [rule
number deny clear feature name | deny config feature name | deny debug feature name | deny
exec feature name | deny show feature name]
Adds RADIUS server. The maximum size is 32.
Add a description for the role. The maximum size is 80.
Add description of users to the role.
Exit from this submode
Negate a command or set its defaults
Enter the rule keyword.
Enter the rule number 1-16.
Add commands to the role.
Remove commands from the role.
Clear commands
Configuration commands
Debug commands
Show commands
Enter the feature name
Exec commands
Enter the feature name (Max Size - 32)
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
role name
20-31