System Health Clear-Errors - Cisco MDS 9000 series Command Reference Manual

system health clear-errors

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
system health clear-errors
To clear previous error conditions stored in the Online Health Management System (OHMS)
application's memory, use the system health clear-errors command.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description interface
fc slot/port
iscsi slot/port
bay port | ext port
module slot
battery-charger
bootflash
cache-disk
eobc
inband
loopback
mgmt
Defaults Enabled.
Command Modes EXEC mode.
Command History Release
1.3(4)
3.1(2)
Cisco MDS 9000 Family Command Reference
21-88
system health clear-errors interface {fc slot/port | iscsi slot/port}
system health clear-errors module slot [battery-charger | bootflash | cache-disk | eobc | inband
| loopback | mgmt]
Modification
This command was introduced.
Added the interface bay | ext option.
Specifies the interface to be configured.
(Optional) Configures the Fiber Channel interface on a Cisco MDS 9000
Family switch.
(Optional) Selects the iSCSI interface to configureon a Cisco MDS 9000
Family switch.
(Optional) Configures the Fibre Channel interface on a port on a Cisco
Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric Switch
for IBM BladeCenter.
Specifies the required module in the switch,
Configure the OHMS battery-charger test on the specified module
Configures the OHMS bootflash test on the specified module.
Configures the OHMS cache-disk test on the specified module.
Configures the OHMS EOBC test on the specified module.
Configures the OHMS inband test on the specified module.
Configures the OHMS loopback test on the specified module.
Configures the OHMS management port test on the specified module.
Chapter 21 S Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x