Dpvm Database Copy Active - Cisco MDS 9000 series Command Reference Manual

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

dpvm database copy active

To copy the active dynamic port VSAN membership (DPVM) database to the config DPVM database,
use the dpvm database copy active command.
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
The following circumstances may require the active database to be copied to the config database:
•
•
If you want to copy the DPVM database and fabric distribution is enabled, you must first commit the
Note
changes.
Examples The following example shows how to copy the active DPVM database to the config DPVM database.
switch# dpvm database copy active
Related Commands Command
dpvm enable
show dpvm
OL-8413-07, Cisco MDS SAN-OS Release 3.x
dpvm database copy active
Modification
This command was introduced.
When the autolearned entries are only added to the active database.
When the config database or entries in the config database are accidently deleted.
Description
Enables DPVM.
Displays DPVM database information.
dpvm database copy active
Cisco MDS 9000 Family Command Reference
5-41