Cisco MDS 9000 series Command Reference Manual page 229

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Usage Guidelines The appropriate daylight savings time zone name should be specified. If it is not, the default name is
used.
Specify the hours-offset argument with a dash before the number; for example,
minutes-offset argument with a dash before the number; for example,
Examples
The following example shows how to set Pacific Daylight Time starting on Sunday in the second week
of March at 2:00 A.M. and ending on Sunday in the first week of November at 2:00 A.M.
switch# config t
switch# clock summer-time PDT 2 sunday march 02:00 1 sunday november 02:00 60
The following example shows how to set the time zone to Pacific Standard Time.
switch# config t
switch(config)# clock timezone PST 0 0
Related Commands Command
clock set
show clock
show run
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Description
Changes the time on the switch.
Displays the current date and time.
Displays changes made to the time zone configuration along with other
configuration information.
-23
.
-59
Cisco MDS 9000 Family Command Reference
clock
. Specify the
4-91