Phone-Contact - Cisco MDS 9000 series Command Reference Manual

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

phone-contact

To configure the telephone contact number with the Call Home function, use the phone-contact
command in Call Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description
number
Defaults None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example shows how to configure the telephone contact number with the Call Home
function.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# phone-contact +1-800-123-4567
Related Commands Command
callhome
callhome test
show callhome
OL-8413-07, Cisco MDS SAN-OS Release 3.x
phone-contact number
no phone-contact number
(Optional) Configures the customer's phone number. Allows up to 20
alphanumeric characters in international phone format.
Note
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
Do not use spaces. Use the + prefix before the number.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
phone-contact
18-9