Cisco MDS 9000 series Command Reference Manual page 647

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following command configures an iSCSI initiator. using the IP address of the initiator node.
switch(config)# iscsi initiator ip address 10.50.1.1
The following command deletes the configured iSCSI initiator.
switch(config)# no iscsi initiator ip address 10.5.0.0
The following command uses the switch's WWN pool to allocate the nWWN for this iSCSI initiator and
keeps it persistent.
switch(config-(iscsi-init))# static nWWN system-assign
The following command assigns the user provided WWN as nWWN for the iSCSI initiator. You can only
specify one nWWN for each iSCSI node.
switch(config-(iscsi-init))# nWWN 20:00:00:05:30:00:59:11
The following command uses the switch's WWN pool to allocate two pWWNs for this iSCSI initiator
and keeps it persistent.
switch(config-(iscsi-init))# static pWWN system-assign 2
The following command assigns the user provided WWN as pWWN for the iSCSI initiator.
switch(config-(iscsi-init))# pWWN 21:00:00:20:37:73:3b:20
Related Commands Command
show iscsi initiator
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Description
Displays information about configured iSCSI initiators.
iscsi initiator ip-address
Cisco MDS 9000 Family Command Reference
11-89