Debug Ttyd - Cisco MDS 9000 series Command Reference Manual

debug ttyd

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug ttyd
To enable TTYD debugging, use the debug ttyd command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
all
errors
events
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug ttyd events command is issued:
switch# debug ttyd events
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-122
debug ttyd {all | errors | events}
no debug ttyd {all | errors | events}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for all TTYD features.
Enables debugging for TTYD error conditions.
Enables debugging for TTYD events.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x