Ivr Fcdomain Database Autonomous-Fabric-Num - Cisco MDS 9000 series Command Reference Manual

ivr fcdomain database autonomous-fabric-num

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ivr fcdomain database autonomous-fabric-num
To create IVR persistent FC IDs, use the ivr fcdomain database autonomous-fabric-num command.
To delete the IVR fcdomain entry for a given AFID and VSAN, use the no form of the command.
Syntax Description
afid-num
vsan vsan-id
Defaults None.
Command Modes Configuration mode.
Command History Release
2.1(2)
Usage Guidelines
This configuration only takes effect when NAT mode is enabled.
Examples The following example shows how to enter IVR fcdomain database configuration submode for AFID 10
and VSAN 20.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config) fcdomain#
The following example shows how to delete all persistent FC ID database entries for AFID 10 and
VSAN 20.
switch# config t
switch(config)# no ivr fcdomain database autonomous-fabric-num 10 vsan 20
Related Commands Command
show ivr fcdomain database
Cisco MDS 9000 Family Command Reference
11-126
ivr fcdomain database autonomous-fabric-num afid-num vsan vsan-id
no ivr fcdomain database autonomous-fabric-num afid-num vsan vsan-id
Specifies the current AFID. The range is 1 to 64.
Specifies the current VSAN. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays IVR fcdomain database entry information.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x