Cisco MDS 9000 series Command Reference Manual page 352

debug fc2
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Syntax Description credit
error
fcid fcid
interface
fc slot/port
fcip port
vsan vsan-id
flag
flow
frame
loopback
pkt
both
tx
rx
bytes bytes
pkts pkts
pkthdr
rdl
rxhdrhistory
txhdrhistory
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
If FSPF receives a bad FC2 packet analyze the output of the debug fc2 pkt command.
Examples
The following example displays the system output when the debug fc2 error vsan 1 command is issued:
switch1# debug fc2 error vsan 1
Cisco MDS 9000 Family Command Reference
6-32
Enables FC2 credit debugging.
Enables FC2 error debugging.
Restricts debugging to the specified FCID.
Restricts debugging to the specified interface.
Restricts debugging to the specified interface.
Restricts debugging to the specified interface.
Restricts debugging to the specified VSAN.
Enables FC2 flags debugging.
Enables FC2 flow debugging.
Enables FC2 frame debugging.
Enables FC2 loopback debugging.
Enables FC packet debugging.
Enables debugging in both the transmit and receive directions.
Enables debugging in the transmit direction,
Enables debugging in the receive direction.
Specifies the number of bytes to display.
Specifies the number of packets to display.
Enables FC header debugging.
Enables FC2 RDL debugging.
Enables FC2 received header history debugging.
Enables FC2 transmitted header history debugging.
Modification
This command was introduced.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x