Ip Routing - Cisco MDS 9000 series Command Reference Manual

ip routing

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ip routing
To enable the IP forwarding feature, use the ip routing command in configuration mode. To disable this
feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example enables the IP forwarding feature.
switch# config terminal
switch(config)# ip routing
Related Commands Command
show ip routing
Cisco MDS 9000 Family Command Reference
11-54
ip routing
no ip routing
Modification
This command was introduced.
Description
Displays the IP routing state.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x