Siemens SINUMERIK 840D Series Diagnostics Manual page 73

11.02
Reactions:
Remedy:
Program Continuation:
6570
Definitions:
Reactions:
Remedy:
Program Continuation:
6580
Definitions:
Reactions:
Remedy:
Program Continuation:
6600
Definitions:
Reactions:
Remedy:
Program Continuation:
6610
Definitions:
Reactions:
Remedy:
Program Continuation:
6620
Definitions:
Reactions:
Remedy:
Program Continuation:
6630
Definitions:
Reactions:
Remedy:
Program Continuation:
 Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
- Alarm display.
Specify that the file concerned is a binary file (e.g. extension: .BIN).
Clear alarm with the Delete key or NC START.
NC memory full
The NC card file system of the NCK is full. The task cannot be executed. Too many sys-
tem files were created in the DRAM.
- Alarm display.
Start fewer "execute from external" processes.
Clear alarm with the Delete key or NC START.
NC memory full
The NC card file system of the NCK is full. The task cannot be executed. To many files
have been loaded
- Alarm display.
Delete or empty files (e.g. part programs).
Clear alarm with the Delete key or NC START.
NC card memory is full
The NC card file system of the NCK is full. No more data can be stored on the NC
card.
- Alarm display.
Delete the data on the PCMCIA card.
Clear alarm with the Delete key or NC START.
Too many files open on NC card
Too many files are being accessed simultaneously on the NC card.
- Alarm display.
Repeat the action later.
Clear alarm with the Delete key or NC START.
NC card has incorrect format
The NC card cannot be accessed because the format is incorrect.
- Alarm display.
Replace the NC card.
Clear alarm with the Delete key or NC START.
NC card hardware is defective
The NC card cannot be accessed because the card is defective.
- Alarm display.
Replace the PCMCIA card.
Clear alarm with the Delete key or NC START.
1 Alarms
1-73