Siemens SINUMERIK 840D Series Diagnostics Manual page 437

11.02
105008
Definitions:
Reactions:
Remedy:
Program Continuation:
105009
Definitions:
Reactions:
Remedy:
Program Continuation:
105010
Definitions:
Reactions:
Remedy:
Program Continuation:
105011
Definitions:
Reactions:
Remedy:
Program Continuation:
105012
Definitions:
Reactions:
Remedy:
Program Continuation:
105013
Definitions:
Reactions:
Remedy:
Program Continuation:
105014
Definitions:
Reactions:
Remedy:
Program Continuation:
105015
Definitions:
Reactions:
 Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
Memory error while writing a cycle call
The resources of the MMC100 are exhausted.
No more dynamic memory available.
- -
-
Internal
No write-authorization for the data
The file is write-protected.
- -
-
Internal
No data selected
The cursor is not placed on a valid file name.
- -
-
Internal
Cycle description cov.com not available
The cycle description sc.com was not found in the NCK file system.
- -
-
Internal
The program is not or only partially editable (NC reset)
The selected program is currently being executed.
- -
-
Internal
The copied data can be inserted with the soft key "Paste"
The copied data is in the clipboard and can be inserted anywhere via the soft key "Paste".
- -
-
Internal
Error while copying!
The file could not be copied.
- -
-
Internal
Error while renaming!
The file could not be renamed.
- -
1 Alarms
1-437