Table of Contents
Advertisement
System Monitoring
7.5.3 Limit Actions
The available limit actions are:
e BEEP - Sound a beep on the HP-71.
e HIGHLIGHT - Display the trace label in inverse video.
e PRINT - Print a message on the system printer.
Hot ion BEEF
[V], [A], or (ENDLINE
OPEN ACT/BIT - Open an actuator channel or clear a bit on a digital output card.
CLOSE ACT/BIT - Close an actuator channel or set a bit on a digital output card.
LIMIT PROGRAM - Call a limit subprogram. Refer to appendix E.
The program presents the limit action menu.
Press the arrow keys to choose the desired limit action,
then press ENDLINE to select that action.
Depending upon the limit action selected, the program may present one of the following prompts:
Limit
=ubprogram™
subprogram name ENDLINE
If the limit action selected is FFRIHMT, the program
prompts for the message to appear on the system printer.
Enter the
message,
up
to
32
characters, and
press
ENDL INE J .
If the limit action selected is [FEM ACT-BEIT or
LOSE HCT, the program prompts for the number of
the channel to open or close.
Enter the channel number, and press
ENDLINE |
The
channel must be either an actuator channel or an output
bit on a digital card.
If the limit action selected is LIMIT FREUOGREAM, the
program prompts for the name of the subprogram to call.
Enter the subprogram name, and press ENDL INE | .
Advertisement
Table of Contents
