HP 82479A Owner's Manual page 70

Strip Chart Program
Scale maximum?
scale maximum ENDLINE
Coner=ian CY oHT
[or [N
Subprogrant
subprogram name ENDLINE
File name?
file name ENDL INE
6-6
Enter the value which represents the upper bound of the
scale for this trace.
The program asks if a conversion subprogram should be
called (for example, to decode readings from a BCD
device).
Press if a conversion subprogram is needed.
If a conversion is requested, the program prompts for the
name of the subprogram.
Enter the name of the subprogram and press ENDLINE | .
If a conversion is requested, the program prompts for the
name of the file containing the subprogram.
Enter the name of the file and press ENDLINE | .