Table of Contents
Advertisement
The SETUP Program
9.9 ADDING A GROUP
The Hdd command is used to add a new group to the setup file.
The data logger package can
accommodate up to 20 groups in one setup file.
To use the Add command, press [A] from the edit menu:
The edit menu.
Press [A] to select the Filid command.
The program displays the number of the group being
added. This will always be at the end of the setup file. If
there are 8 groups in the current setup, the display will
read "Group 9".
The program begins to prompt for the specifications for
the new group.
Follow the same procedure for group
entry as described under the Hecommand.
When the new group has been specified, the program
returns to the edit menu.
Advertisement
Table of Contents
