HP 82479A Owner's Manual page 22

Getting Started
An example of each type of device specifier is presented below. Further details may be found in section 1
of the HP 82401A HP-IL Interface Owner's Manual.
Address
FEIMNTER IX
FEIMTER I
Assign code
ASSIGH Io
[ENDLINE]
FEIMTER IZ ":FE" [ENDLINE]
"= |ENDLINE
H [ENDLINE]
"i IH. PRY
Device Word
FEIMTER 13
[(ENDLINE]
FEIMTER I=
[ENDL INE]
Device ID
FEIMTER IZ
[ENDLINE]
FRIMTER If
[ENDLINE]
FRIMTER
FREINTERZY
nHFZEES
nHFZE led 02D
Accessory ID
FREINTER IS =&2
FEIMNTER IS
Volume Label
CHT
2-6
HTH
ENDLINE
Assigns the second device (address 2) as the "printer"
device.
Uses the value of variable 1 as the address to assign the
"printer" device.
Associates codes with the first two devices in the loop.
Assigns the device with assign code FF as the "printer"
device.
Assigns the first printer class device as the "printer"
device.
Assigns the second printer class device as the "printer
device.
Assigns the first ThinkJet printer as the "printer" device.
Assigns the second HP-IL/RS-232 interface in the loop as
the "printer" device.
Assigns the device with an accessory ID of 32 as the
"printer" device.
Assigns the second device in the loop with an accessory ID
of 32 as the "printer" device.
Accesses the catalog of directory entries on the medium
with the volume label [IH TH.