Table of Contents
Advertisement
System Monitoring
scale minimum?
The program prompts you for the lower bound of the
_
temperature scale. Set the lower bound to 20°C.
26
|ENDLINE
=oale maximum?
Set the upper bound of the temperature scale to 30°C.
=
[ENDLINE
Conversion
CY oHT
No conversion subprogram is needed.
Limit test
1
OYoH272
Although no limit tests were set for trace 1, you are given
the option of setting limit tests for trace 2. Two sets of
upper and lower limits are to be set for trace 2; first the
alarm (beep) limits, then the control (actuator) limits. Press
to request the first limit test.
Limit taupe:
Low High?
To set a lower limit, press [L].
Limit point?
Set the lower alarm limit to 24°C. The program will
compare each reading with this limit.
=4
[ENDLINE
Hot ion
BEEF
The limit action menu appears. Just press ENDLINE
to
select [2E2EF as the action.
ENDLINE
Limit test
2 OH?
Now you can set a second limit test. Press [Y).
Limit ftupeds
Low High™
To set an upper limit, press [H).
Limit point?
Set the upper limit to 26°C.
=&
[ENDLINE
7-28
Advertisement
Table of Contents
