Table of Contents
Advertisement
The SETUP Program
9.3 SETUP PROGRAM OPERATION
ELH SETLUF
Feading the HFZ421...
Edit File Yerifu Ogit?
Run the SE TILIF program.
The program reads the internal configuration of the
HP 3421A.
The main menu.
The program has 9 commands which are selected from three menus as follows:
Main Menu
Edit File Yerifuo uit?
Edit Menu
Hdd [Del Epl
Frt
Main™
File Menu
Get
Mew Save Main?
Edit
- Select the edit menu (press (EJ).
File - Select the file menu (press [F)).
Warifu
- Verify a setup file (press [U)).
MJit
- End the program (press [Q)).
Hdd
- Add a group to the setup (press (RA).
[=1
- Delete a group from the setup (press [D)).
Fil
- Replace a group or its limits (press [R)).
Fit.
- Print the setup file (press [P)).
Mair - Return to the main menu (press [M)).
3=t
- Get an existing setup file (press [G)).
Mew
- Create a new setup file (press [N]).
Saw - Save the current setup file (press [S)).
Mair - Return to the main menu (press [M)).
To select a command, press the key corresponding to the first letter of the command.
For instance, to
select the M10 command, press [N]
The FLAG 0 annunciator in the display reminds you that the current setup has not been saved to a file.
The annunciator will go on when a setup is created or edited, and will go off when the setup is saved.
9-3
Advertisement
Table of Contents
