Table of Contents
Advertisement
Strip Chart Program
6.9 DELETING A TRACE
The [l=] =1 & command is used to delete a trace from the current setup.
When a trace is deleted, remaining traces are renumbered to preserve sequential numbering.
If trace #4
of § traces is deleted, the original trace #5 will become trace #4.
To use the [l= 1=t & command, press [DO] from the edit menu:
Hdd Del
Epl
Prt Main™
The edit menu.
(D]
Press [D] to select the [11 et 2 command.
Trace rmumber?
The program prompts for the number of the trace to be
deleted.
trace number ENDLINE
Enter the trace number, and press [ ENDLINE J.
[elete trace np OYSH7
The program confirms that you wish to delete the trace.
or
Press
to delete the trace, or
to cancel the request.
Mork img.
The program displays a status message while the trace is
being deleted.
Hold Oel
Epl
Prt Main™
The program returns to the edit menu.
Advertisement
Table of Contents
