Table of Contents
Advertisement
channel number ENDLINE
Hl1l readings
OY HY
Mor N
Fegding
reading number ENDLINE
select
=cans
YOM
or
Start
dated
YYeMMSDO
start date ENDLINE
The REPORT Program
If the data file has been generated by the L.[I[5 program
and contains more than one group, the program asks for
the number of the group to read.
(If there is only one
group, this prompt will not appear).
Enter the group number (or El to escape back to the main
menu) and press ENDLINE | .
If a ="TREIF or MIMITOR file contains more than one
trace, the program asks for the trace to analyze.
Enter the trace number and press ENDLINE | .
If the data file has been generated by LI and the
specified group scanned more than one channel in the
HP 3421A, the program asks for the channel number to
examine.
Enter
the
channel
number
to
analyze
and
press
ENDLINE | .
If a group from LI contains multiple readings from a
burst measurement, or multiple readings from a custom
program, the program asks if statistics should be calculated
from all readings in the scans.
If so, press
and skip the next step. If you want statistics
from only one reading in each scan, press NJ.
Now select which of the multiple readings will be used to
calculate statistics.
For example, if a custom program
stored 26 values in each scan, and you are analyzing the
14th reading from each scan, enter 14.
The program asks if you wish to generate statistics only
from a given time period.
Press
to specify the time and date of the beginning and
end of the time period to print, or press
to print all
records in the file and skip the next four steps.
The program asks for the starting date of the time period.
Enter the starting date in "'''% [1M: [1 form, and press
ENDLINE J
Advertisement
Table of Contents
