Table of Contents
Advertisement
Strip Chart Program
To run the program, connect the HP-71 to the HP 3421A, the ThinkJet printer, and any other peripherals
that will be used in the system. Start the program as follows:
ELUM STEIFF
[ENDLINE
Run the strip chart program.
Feadimng the HFZ421...
The program reads the internal configuration of the
HP 3421A.
Edit File Eun Chait?
The main menu.
The program has 11 commands which are selected from three menus as follows:
Main Menu
Edit
- Select the edit menu (press (EJ).
Edit File Fun Chait?
File
- Select the file menu (press [F)).
For
- Run the strip chart (press [R)).
uit
- End the program (press [Q)).
Edit Menu
Hdd
- Add a trace to the setup (press [R)).
Hod Del Epl Pri Main™
Del
- Delete a trace from the setup (press [D)).
Fpl
- Replace a trace in the setup (press [R)).
Fit
- Print the strip chart setup (press [P)).
Mazin
- Return to the main menu (press [M).
File Menu
Let
- Get an existing setup file (press [G)).
Let
Mew Save Ver Main®
Fe
- Create a new setup file (press [N)).
Save
- Save the current setup file (press [S)).
We
- Verify the current setup file (press [U)).
Main
- Return to the main menu (press [M).
To select a command, press the key corresponding to the first letter of the command.
For instance, to
select the Fir command, press [R]
The FLAG 0 annunciator in the display reminds you that the current setup has not been saved to a file.
The annunciator will go on when a setup is created or edited, and will go off when the setup is saved.
6-2
Advertisement
Table of Contents
