Table of Contents
Advertisement
Strip Chart Program
6.5 STORING STRIP CHART SETUPS
Use the =a@.'s command to save the current strip chart setup to a data file, either in RAM or on a mass
storage device.
To use this command, press
from the file menu:
Get
Men
Sue
ip
Mair
HYVES File name?
file name ENDL INE
haere it
file
CH
Mor N
SEWING.
Eclit
File
Eun
Chgit
The file menu.
Press
to select the =i ate command.
The program prompts for the file in which to store the
setup.
Enter the file name and, if needed, the optional mass
storage specifier, then press ENDLINE | .
If the file already exists, the program asks if the file
should be overwritten.
Press
to overwrite the file with the current strip chart
setup, or press
to escape back to the file menu.
The program displays a status message while the setup is
being stored in the file.
The program returns to the main menu.
Advertisement
Table of Contents
