Table of Contents
Advertisement
Oizsplav:BCE Abort iC]
B], [C} R]or (FQ)
DizsplaviBCR
Quit: [FE]
Bl (C] R] or [f1Q)
Edit File Fun Guit?
System Monitoring
This message appears in the HP-71 display during the
monitoring session if readings are being stored to a data
file. While the monitor is running, the video display 1s
constantly updated with new readings, and any limit
actions are taken if limit tests are met. You are given
several display options:
Press
to toggle between the default and bar graph
display formats.
Press
to toggle between the default
and column display formats. Press [R] to refresh the entire
video display.
To abort the session before all specified
scans have been taken, press [f]Q]
After all the specified scans have been stored, or if no
readings are to be stored, the program displays this
message, permitting the program to end when [f)[Q] is
pressed. Press [B), [C], or [R] to select the display options.
After the monitor session has ended, the program returns
to the main menu.
Data files created by the MIMI TUR program use the HPAF file format (refer to appendix H). You can
use the EEFFRET program to generate reports using the data in such files.
NOTE
The data storage interval for the monitor program is a nominal interval. A
timer is used to set a flag when the data should be stored, but data is stored
only between traces. Some combinations of measurement and limit tests
take longer than others, which will result in minor deviations from the
exact interval. The average interval will be the interval you specify.
7-15
Advertisement
Table of Contents
