Table of Contents
Advertisement
The TRANSFER Program
e Run the program TEHMZFEF in the HP-71 Data Acquisition Pac. This program prompts
for name of the data file to be transferred.
To establish the link between the HP-71 and the HP 44456 package, configure an HP 82169A
HP-IL/HP-IB Interface in mailbox mode and connect it to both the HP-71 and the Series 200 computer.
Mailbox mode is established by setting bit m to 1 and setting the address switches b, tob 5 to the desired
HP-IB address.
The HP-IL/HP-IB interface switches configured for
mailbox mode at HP-IB address 11.
For further details about the configuration of the mailbox, refer to section 4 of the HP 821694
HP-IL/HP-IB Interface Owner's Manual.
NOTE
TRANSFER on the HP-71 will always use the first HP-IL/HP-IB interface
found on the primary HP-IL loop (loop 1).
12-2
Advertisement
Table of Contents
