HP 82479A Owner's Manual page 110

System Monitoring
7.15 ENDING THE MONITOR PROGRAM
The J1Jit command is used to end the program. If you want to reuse the current trace setup, be sure to
save it to a file.
To end the program, press (Q) from the main menu:
Edit File Rum Chait? The main menu.
Press to end the program.
Save setup OYVoHY If the current setup has not been saved, the program asks
if you wish to save it.
or Press to save the setup, or [N] to end the program and
loose the current setup.
Done The program is finished.
7-24