Table of Contents
Advertisement
Start time? HH: MME:
start time ENDLINE
Act ive at
=tart
OY
or N
Intervals
HHIMM: SS
interval ENDLINE
Ho.
of scansy.
number of scans ENDLINE
FH
[DZ
Yalts
The SETUP Program
The program prompts for the time to begin scanning this
group.
Enter
the
time
in
HH:MM:SS
format,
and
press
ENDLINE | The start time is in 24-hour format.
Enter
—1 for groups that should begin as soon as the LI;
program starts.
The program asks if the group is initially active.
If the group is to unconditionally begin scanning at the
start time, press [Y]. If the group is to begin scanning only
if activated by another group, press NA
The program prompts for the interval between start times
of each scan.
Enter the interval in HH: MM: SS format press ENDLINE | .
The interval must be five seconds or greater.
The program prompts for the number of times the group
should be scanned.
Enter the number of scans, and press
ENDLINE | .
You
may specify from 1 to 99999 scans.
The function menu.
Press the arrow keys to choose the function to be
measured, then press ENODLINE to select that function.
What you do next depends on the function that you have selected. Refer to the appropriate subsection:
9.4.1, "Signals"; 9.4.2, "Digital Functions", 9.4.3, "Control"; or 9.4.4, "Custom Program"; then follow the
instructions in subsection 9. §, "Limits." When you have entered all of the specifications for one group, you
will be prompted to begin entering the information for the next group. When all groups have been
entered, the main menu will reappear.
9-5
Advertisement
Table of Contents
