Table of Contents
Advertisement
9.10 DELETING A GROUP
The SETUP Program
The [le] &t = command is used to delete a group from the current setup file.
NOTE
You may not delete a group that is referenced by the limit actions of
another group. If the group is referenced, the program will return an error
message and the delete request will be canceled.
To use the [l= 1&1 & command, press [D] from the edit menu:
Hdd [Del Epl Fret
Main™
Ol
Group rumber
group number ENDLINE
Delete group a CFR 7Y
or
Work iro...
Hdd [Del Epl
Frit
Main
The edit menu.
Press [D) to select the [l= 1 =t & command.
The program prompts for the number of the group to be
deleted.
Enter the group number, and press ENDLINE | .
The program confirms that you wish to delete the group.
Press
to delete the group, or [N] to cancel the request
and return to the edit menu.
The program displays a status message while the group is
being deleted. The setup file will be renumbered to reflect
the change. All intra-group references will be preserved.
The program returns to the edit menu.
9-17
Advertisement
Table of Contents
