HP 82479A Owner's Manual page 171

The TRANSFER Program
12.6 USING THE FROM71 SUBPROGRAM
The Series 200 BASIC From 1 subprogram is contained in FIII17"1 on the supplemental disc. A
familiarity with the HP 44456 package is assumed.
To load the Ftory l subprogram, perform a LOADSUE FREOMT1D FROM ""FEOMSL® or
LOADSUE ALL FROM "FREOMT 1". Additional subprograms needed to use For1 are:
1) Hpnav_prterror (from =STEM)
2) Hpnav_disperror (from == TEM)
3) Save_rvect (from DATH_STIELE)
Entry and exit conditions for the subprogram are as follows:
INVOCATION:
Fromdlobeot named, INTEGER Mailbos. Errored lag?
ENTRY:
Vect mame F Name of the vector series. This must be short enough to
accommodate a 4 digit numeric postfix for the file names (e.g.:
WOLLT=d ddd).
Mai lle HP-IB address of the HP 82169A HP-IL/HP-IB Interface. The
interface must be set in "mailbox" mode.
EXIT:
EREOREFLHG ki No errors.
1 Transfer is aborted by the HP-71.
= Data received is not recognized as IEEE real.
= The HP-71 sends an unrecognized command.
4 Other abnormal termination.
12-7