Table of Contents
Advertisement
Strip Chart Program
FH T Thermocouples
ENDLINE
Degres=:
(CF KE or R27
#4 [ENDLINE]
ale
piniende
=H [ENDLINE
Lormpaersion
CVT
N
BEclit
File
Fun Ghait?
[R]
Foe
of
measurements?
SE [ENDLINE]
Imterwals
HHIMM ZS
ENDLINE
Chart
hitle™
DARKROOM STRIF CHART
[ENDLINE]
6-20
You are prompted for the temperature units for trace 2.
Press
to select Celsius.
You are prompted for the number of the HP 3421A
channel to be measured for trace 2. Channel 4 is the
bath-temperature thermocouple.
The program prompts you for the lower bound of the
temperature scale. Set the lower bound to 20°C.
Set the upper bound of the temperature scale to 30°C.
No conversion subprogram is needed.
Once the setup file is created, the main menu reappears.
Press [R] to begin the strip chart.
The program prompts for the number of readings to
record. Enter kl to plot 50 sets of readings.
The program prompts for the interval between readings.
Enter [1 to take data at the fastest rate (you can do this by
just pressing [ENDLINE J).
The program prompts for a title for the chart.
Advertisement
Table of Contents
