Table of Contents
Advertisement
System Monitoring
7.4.1 Signals
# Digits C2.
4s
oF S27
The program prompts for the number of digits of
resolution. This prompt does not appear if the function is
frequency or temperature.
(Frequency measurements are
made with S. 5-digit resolution and a 1-second gate time.)
(3), (4), or [5]
Press [3], (4), or [S]to use 3.5, 4.5, or 5.5 digits in the
HP 3421A.
egress:
(0 F OK oor E27
If the function is temperature, the program prompts for
the desired temperature unit. Temperature measurements
are made with S. § digit resolution.
Press
to select Celsius units,
to select Fahrenheit
units,
to select Kelvin units, or [R] to select Rankine
units.
Charmel?
The program prompts for the channel number in the
HP 3421A which should be measured.
channel number ENDLINE
Enter the channel number, then press ENODLINE | .
Scale minimum?
The program prompts for the scaling values for the
pictorial representation in the video display.
scale minimum ENDL INE
Enter the value which represents the lower bound of the
nominal operating range for this trace.
scale maximum ENDL INE
Enter the value which represents the upper bound of the
nominal operating range for this trace.
Conversion
OY SHIY
The program asks if a conversion subprogram should be
called.
or
Press
if a conversion subprogram is needed.
SubpErogran?
If a conversion is requested, the program prompts for the
name of the subprogram.
subprogram name ENOLINE
Enter the name of the subprogram and press ENDLINE | .
7-7
Advertisement
Table of Contents
