Ending The Setup Program - HP 82479A Owner's Manual

The SETUP Program
9.13 ENDING THE SETUP PROGRAM
The 1111 command is used to end the program. If you haven't yet saved the current group setup, you
will be asked whether you want to do so.
To end the program, press [Q) from the main menu:
Edit File Yerifua Quit The main menu.
@] Press [@] to end the program.
Dave setup CoH If the current setup has not been saved in a file, the
program asks if you wish to save your setup.
or Press to save the setup, or [N] to end the program and
loose the current setup.
Clore The program is finished.
9-20