Table of Contents
Advertisement
The SETUP Program
Humber of
scans?
=z
[ENDLINE
FH-~ DZ
Wolfs
[v], [v], ™], M], [v],
FH~ T Thermocouple
ENDLINE
Degrees:
(CF KE or EI
First channel?
=
[ENDLINE
Last channel?
4
[ENDLINE
Comersion C7 HY
Limit fest
1 O42
store readings CYVSHY
CE
I
lw TH <I
Label?
Bath temp.
[ENDLINE
9-22
Enter the scans for group one.
The function menu appears. Use the
key to select
T Thermocouple.
You are prompted for the temperature units for trace 1.
Press
to select Celsius.
You are prompted for the number of the first HP 3421A
channel to be measured for group 1.
Channel 3 is the
room-temperature thermocouple.
You are prompted for the number of the last HP 3421A
channel to be measured for group 1.
Channel 4 is the
bath-temperature thermocouple.
No conversion subprogram is needed.
The program gives you the option of setting limit tests.
Press
to set no limit tests for group 1.
The program asks if the data acquired for group 1 should
be stored.
Now
the
program
prompts
you
to
begin
entering
specifications for group 2.
The program prompts you for a label for group number 2.
Advertisement
Table of Contents
