Table of Contents
Advertisement
System Monitoring
7.11 ADDING A TRACE
The Hdd command is used to add a new trace to the current setup. The program can accommodate up to
18 traces in one setup.
To use the Hdd command, press [A] from the edit menu:
Add Del
Epl Frt
Main?
|
# %
Trace
9 * #
Hdd Del Epl Fri Main?
7-20
The edit menu.
Press (A) to select the Fold command.
The program displays the number of the trace being
added. This will always be at the end of the setup file. If
there are 8 traces in the current setup, the display will
read "Trace 9".
The program begins to prompt for the specifications for
the new trace. Follow the same procedure for trace entry
as described under the Met command.
When the new trace has been specified, the program
returns to the edit menu.
Advertisement
Table of Contents
