HP 82479A Owner's Manual page 81

Strip Chart Program
6.12 ENDING THE STRIP CHART PROGRAM
The 1111 command is used to end the program. If you want to reuse the current strip chart setup, be
sure to save it to a file.
To end the program, press [Q) from the main menu:
Edit File Fun foit™
@
mauve =etup
cane' ome U o !
CHD
[or NJ
Chores
The main menu.
Press [@) to end the program.
If the current setup has not been saved to a file, the
programs asks if you want to save the setup before the
program ends.
Press to save the setup, or [N] to end the program and
loose the current setup.
The program is finished.