Table of Contents
Advertisement
6.8 ADDING A TRACE
Strip Chart Program
The Hild command is used to add a new trace to the current setup. The program can accommodate up to
9 traces in one setup.
To use the Add command, press [A] from the edit menu:
Add Del Epl Frt
Main™
(A)
# % Trace 5 % *%
Fi~ DC Volts
Hdd Del Epl
Frit
Main
The edit menu.
Press (A) to select the Fidid command.
The program displays the number of the channel being
added. This will always be at the end of the setup file. If
there are 4 traces in the current setup, the display will
read "Trace $5"
The program begins to prompt for the specifications for
the new trace. Follow the same procedure described under
the Hz) command.
When the new trace has been specified, the program
returns to the edit menu.
6-13
Advertisement
Table of Contents
