Table of Contents
Advertisement
The MSDOSXFR Program
MS-DOS-format disc (M=00%=FE will not format an unformatted disc). If the target device is a
computer, it should be running HPLINK before being added to the loop. If the loop has been disrupted, it
may be necessary to perform a FEZET HF IL and EESTORE
I) before continuing.
Once the loop has been properly configured, run the M=[11==FF program:
FLUMSlossFE
file name ENDL INE
Feadimg. . .
mit rmumber?
unit number ENDLINE
Run the program.
The program prompts for the name of the data file to
transfer.
Enter the name of the ZTE IF, MIMI TORE or L0G data
file that you wish to transfer.
The HP-71 examines the file to be transmitted.
The program prompts for the name of the MS-DOS file to
be created.
Enter the file name in the form indicated, and press
ENDLINE | .
If the target device supports multiple units, the program
prompts for the unit number.
Enter the unit number corresponding to the desired target
disc.
The program will now take a few moments to examine the MS-DOS disc. The amount of time is variable;
just a few seconds for a floppy disc to over a minute for a large hard disc.
Gioup #7
group number
elect scans OYOMHIT
or
13-4
If the data being transferred is from a L[I[3 experiment,
the program asks for the group number to transfer.
Enter the group number, and press ENDLINE J .
The program asks if you wish to selectively transfer scans.
Press
to transfer all scans in the group.
Press
to
specify a time and date window within the file from
which to transfer data, and answer the following four
questions:
Advertisement
Table of Contents
