Table of Contents
Advertisement
11.2 PRINTING THE DATA
The REPORT Program
You can use the Ft-irmt command to print some or all of the data in a file. If the data file has been
generated by the STEIFF or MOMI TOR programs, the program will print all readings for each data
record in the specified time period. If the data file has been generated by the L.I1l5 program, the program
will request the group number and time interval for the printout.
To use the Ft-irt command, press [P] from the main menu:
Chet L=t Prt Stat End?
[P]
Group?
group number ENDLINE
me lect scans CYNE
or
start dated
YYoMMSDO
start date ENDLINE
start timed
HHIMMIZES
start time [ENDLINE ]
Erd date:
YY-MHSOD
end date
The main menu.
Press [P] to select the Ft-irt command.
If the data file has been generated by the LII5 program,
the program asks for the group number to be printed. (If
there is only one group, this prompt will not appear.)
Enter the group number, or Kl to escape back to the main
menu, and press ENDLINE | .
The program asks if you wish to print only data from a
given time period.
Press
to specify the time and date of the beginning and
end of the time period to print, or press
to print all
records in the file (or group) and skip the next four steps.
The program asks for the starting day of the time period.
Enter
the
date
in
"9%:PFM:0O0
form
and
press
ENDLINE J .
The program asks for the starting time in the first day of
the time period.
Enter the starting time in HH: [l1: 55 form (24hr clock)
and press [ENDLINE J.
The program asks for the ending date of the time period.
Enter the ending date in '%': [11% [1 form and press
ENDLINE J .
11-3
Advertisement
Table of Contents
