HP 82479A Owner's Manual page 107

7.12 DELETING A TRACE
System Monitoring
The [1=1 =t = command is used to delete a trace from the current setup.
When a trace is deleted, remaining traces are renumbered to preserve sequential numbering. If trace #4
of § traces is deleted, the original trace #5 will become trace #4.
To use the De 121 2 command, press [D] from the edit menu:
Hdd O=l Epl Frit Main™
Ol
Trace number?
trace number ENDLINE
Oelete trace no CYoHIY
Mor N
Mork ing...
The edit menu.
Press [D] to select the [l= 1 t= command.
The program prompts for the number of the trace to be
deleted.
Enter the trace number, and press ENDLINE | .
The program confirms that you wish to delete the trace.
Press to delete the trace, or to cancel the request.
The program displays a status message while the trace is
being deleted.
The program returns to the edit menu.
7-21