Table of Contents
Advertisement
System Monitoring
To run the program, connect the HP-71 to the HP 3421A, video interface, and any other peripherals that
will be used in the system.
FUN MOMITORE
[ENDLINE
Run the MOMI TOR program.
Feadimng the HFZ421...
The program reads the internal configuration of the
HP 3421A.
Edit
File Fun Cait?
The main menu.
The program has 11 commands which are selected from three menus as follows:
Main Menu
Edit - Select the edit menu (press [E)).
Eclit
File Fun Gait?
File - Select the file menu (press [F]).
Fur
- Run the monitor (press [R]).
Miuit
- End the program (press [Q).
Edit Menu
Add
- Add a trace to the setup (press [R)).
Fidd Del
Epl
Frit
Main™
Del
- Delete a trace from the setup (press (D)).
FEpl
- Replace a trace or its limits (press [R]).
Ft-+
- Print the setup file (press [P).
Mair - Return to the main menu (press [M).
File Menu
Get
- Get an existing setup file (press [G).
Get
Hew Save Ver Main?
Flew
- Create a new setup file (press [N)).
Sawa - Save the current setup file (press [S)).
"Yer
= Verify the current setup file (press [U)).
Main - Return to the main menu (press [M)).
To select a command, press the key corresponding to the first letter of the command.
For instance, to
select the Licommand, press [R].
The FLAG 0 annunciator in the display reminds you that the current setup has not been saved to a file.
The annunciator will go on when a setup is created or edited, and will go off when the setup is saved.
7-4
Advertisement
Table of Contents
