Table of Contents
Advertisement
System Monitoring
7.14 PRINTING THE SETUP FILE
The Fr-1imt command is used to print the specifications for each trace in the current setup.
To use the F+~imt command, press the [P] key from the edit menu:
Add [l=1 Epl Frt
Main™
The edit menu.
(P]
Press the [P] key to select the Ft~irmt command.
Frrimt ing. ..
The program displays a status message while the setup file
is being printed.
Hdd [el Epl Frt
Main?
The program returns to the edit menu.
A sample printout of one trace looks like this:
TEACE 1:
Fusl Fressure
Fumct ion:
2-Wire Ohms in channel 4
Corversion:s
COMVERET
1m CFILE
Digits of
resolution:
3.35
Scale minimum:
EB
Scale maximums
Limit
1%
LOW =
Limit 28
HIGH
Limit 2%
HIGH
IMT:
Low fuel pressure!
OFEM HAHCTAEREIT 4
FRIMT:
Heater off
7-23
Advertisement
Table of Contents
