Table of Contents
Advertisement
Strip Chart Program
6.3.1 Signals
[C], [F], K], or R]
Channel?
channel number ENDLINE
Doale minimum?
scale minimum ENDLINE
moale maximgm?
scale maximum ENDLINE
Corerzion
CoH
[Y] or [NJ
Subprogrant
subprogram name ENDLINE
6-4
The
program prompts
for
the
number of
digits
of
resolution. This prompt does not appear if the function is
frequency or temperature. (Frequency measurements are
made with 5. 5-digit resolution and a | -second gate time.)
Press (3), (4), or
to use 3.5, 4.5, or 5.5 digits in the
HP 3421A.
If the function is temperature, the program prompts for
the desired temperature unit. Temperature measurements
are made with 5. §-digit resolution.
Press
to select Celsius units,
for Fahrenheit units,
for Kelvin units, or [R] for Rankine units.
The program prompts for the channel number in the
HP 3421 A which should be measured.
Enter the channel number, then press ENDLINE J .
The program prompts for the scaling values for the strip
chart.
Enter the value which represents the lower bound of the
scale for this trace.
Enter the value which represents the upper bound of the
scale for this trace.
The program asks if a conversion subprogram should be
called.
Press
if a conversion subprogram is needed.
If a conversion is requested, the program prompts for the
name of the subprogram.
Enter the name of the subprogram and press ENDLINE | .
Advertisement
Table of Contents
